Cover Detection; Alarm Manager - Abus IPCB62500 Manuel Utilisateur

7.5.7.2 Cover Detection

Enable Cover Detection:
Preview Area:
Draw Area:
Delete:
Sensitivity:

7.5.8 Alarm manager

Trigger:
Schedule:
Delete all:
Mark all:
Action:
This function detects if an area within the live image is covered.
Preview and configuration area.
Draw here an area which shall be monitored by tamper detection.
Procedure: Press to start -> draw area with left mouse button ->
press again to stop drawing.
Delete the area.
Change the sensitivity of the detection (3 levels).
an alarm rule consists of a trigger, a schedule for applying the rule
and an action. Select a trigger for the alarm rule from the list. Only
one trigger can be configured for each rule.
an alarm rule can be enabled in 30 minute intervals. This is
highlighted directly in the matrix on the left (red = enabled).
deletes the entire schedule.
selects the entire schedule.
one or more actions can be defined for the rule on this page.
95