Parking, Transport And Storage; Maintenance; Emptying The Dust Container - Miele SKCE0 Mode D'emploi

Masquer les pouces Voir aussi pour SKCE0:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en-US
When vacuuming especially fine
dust, e.g. sawdust, sand, flour, tal-
cum powder etc., electrostatic
charges build up naturally. Under
certain conditions these charges will
be released. To avoid the unpleasant
effects of these discharges, a metal
inlay has been incorporated into the
underside of the handle. Keep your
hand in contact with the upper,
curved part of the handle when vac-
uuming (Fig. 15).
If a large amount of dust is vacuumed
at once, the ComfortClean self-cleaning
function should be started manually ei-
ther during a vacuuming pause or
straight away. This enables the vacuum
cleaner to achieve the very best clean-
ing performance again straight away
(see "Maintenance - Starting the Com-
fortClean self-cleaning function manu-
ally").

Parking, transport and storage

Park system for pauses during vacu-
uming (Fig. 16)
The Park system allows you to conve-
niently park the wand and floorhead
during short pauses in vacuuming.
 Slot the floorhead into the parking at-
tachment on the vacuum cleaner.
If your vacuum cleaner is on a slop-
ing surface such as a ramp, fully re-
tract the telescopic wand fully.
16
Park system for storage (Fig. 17)
Always unplug the vacuum
cleaner from the power supply when
you have finished using it.
 Stand the vacuum cleaner upright.
It is a good idea to fully retract the
telescopic wand so that the vacuum
cleaner takes up less room for stor-
age.
 Slot the floor head down into the
parking attachment on the vacuum
cleaner.
This makes the vacuum cleaner easier
to carry and store.
For safety reasons, do not lift the
vacuum cleaner using the dust con-
tainer carrying handle.

Maintenance

Always switch off the vacuum
cleaner for maintenance work and
unplug the power cord from the wall
socket.
Emptying the dust
container (Figs. 18 - 23)
 Empty the dust container before the
dust has reached the max marking
on the dust container.
 Pull the dust container handle up-
ward.
 Remove the dust container upward.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Skre0Blizzard cx1

Table des Matières