Réglementations - Brother HL-5280DW Guide D'installation Rapide

Réglementations
Federal Communications Commission (FCC)
Declaration of Conformity (pour les Etats-Unis)
Responsible Brother International Corporation
Party : 100 Somerset Corporate Boulevard
P.O. Box 6911
Bridgewater, NJ 08807-0911
USA
Telephone: (908) 704-1700
declares, that the products
Product name: Laser Printer HL-5280DW
Model number: HL-52
Product options: Lower Tray Unit LT-5300
comply with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device
must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
Important
A shielded interface cable should be used in order to
ensure compliance with the limits for a Class B digital
device.
Changes or modifications not expressly approved by
Brother Industries, Ltd. could void the user's authority
to operate the equipment.
Déclaration de conformité aux prescriptions de
Industry Canada (pour le Canada)
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à
la norme NMB-003 du Canada.
Consignes de sécurité
Perturbations radioélectriques (modèle 220-240
volts uniquement)
Cette imprimante satisfait à la norme EN55022
(Publication CISPR 22)/Classe B.
Avant d'utiliser ce produit, vérifiez que vous utilisez
l'un des câbles d'interface suivants :
1 Un câble d'interface parallèle blindé à paire
torsadée portant la marque "IEEE 1284 compliant"
2 Un câble USB
Ce câble ne doit pas faire plus de 2 mètres de long.
Déclaration de conformité pour la CE
Le fabricant
Brother Industries Ltd.,
15-1, Naeshiro-cho, Mizuho-ku,
Nagoya 467-8561, Japon
Usine
Brother Corporation (Asie) Ltd.,
Brother Buji Nan Ling Factory,
Gold Garden Ind., Nan Ling Village,
Buji, Rong Gang, Shenzhen, Chine
déclare dans la présente que :
Description du produit : Imprimante laser
Nom du modèle : HL-5280DW
est conforme aux dispositions de la Directive R & TTE (1999/5/EC) et nous déclarons que
ce produit respecte les normes suivantes :
Normes respectées :
Harmonisées Sécurité : EN60950-1:2001
CEM : EN55022: 1998 + A1: 2000 +A2: 2003 Clase B
EN55024: 1998 + A1: 2001 +A2: 2003
EN61000-3-2: 2000
EN61000-3-3: 1995 + A1: 2001
Radio : EN301 489-1 V1.4.1
EN301 489-17 V1.2.1
EN300 328 V1.6.1
* Les normes radio s'appliquent uniquement au modèle HL-5280DW.
Année d'apposition du label CE : 2005
Délivré par : Brother Industries, Ltd.
Date : 28 December 2005
Lieu : Nagoya, Japon
Signature :
Takashi Maeda
Responsable
Groupe Management de la qualité
Service de gestion de la qualité
Information & Document Company
3