Component List - Ayce BV-C1536D Notice Originale

It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times
when the tool is switched off or when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration
such as: maintain the tool and the accessories, keep the hands warm, organization of work
patterns.

COMPONENT LIST

1.
Front blower tube
3.
Switch button
5.
Battery
7.
Charger
Fig.1
ASSEMBLE THE BLOWER TUBE (FIG.2, FIG.3)
Carefully remove the product and any accessories from the box. Make sure that all items
listed above are included.
Warning: The leaf blower must not be used or switched on until it has been fully
assembled.
Put the front tube to the rear tube as shown in Fig.2, till the button locks the front tube in
2.
Blower button/ Coupling sleeve
4.
Switch trigger
6.
Battery connector
8.
Bag