Other Safety Instructions - Ayce BV-C1536D Notice Originale

iii) check for and tighten any loose parts.
f) Do not allow processed material to build up in the discharge zone; this may prevent
proper discharge and can result in kickback of material through the intake
opening.
g) If the machine becomes clogged, shut-off the power source and disconnect the
machine from supply before cleaning debris.
h) Never operate the machine with defective guards or shields, or without safety
devices, for example the front tube in place.
i) Keep the power source clean of debris and other accumulations to prevent damage
to the power source or possible fire.
j) Do not transport this machine while the power source is running.
k) Always remove the battery:
•
whenever the machine is left by the user.
•
Before clearing a blockage.
•
Before checking, cleaning or working on the machine.
•
After striking a foreign object to inspect the machine for damage.
•
If the machine starts to vibrate abnormally, for immediately check.
4) Maintenance and storage
a) When the machine is stopped for servicing, inspection, or storage, or to change an
accessory, shut off the power source, remove battery and make sure that all
moving parts are come to a complete stop. Allow the machine to cool before
making any inspections, adjustments, etc. Maintain the machine with care and
keep it clean.
b) Store the machine in a dry place out of the reach of children.
c) Always allow the machine to cool before storing.
d) Replace worn or damaged parts for safety. Use only genuine replacement parts
and accessories.
e) Never attempt to override the interlocked feature of the guard.
f) Have your machine by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the machine is maintained.
g) Do not to touch moving hazardous parts before battery is removed and the moving
hazardous parts have come to a complete stop
5) Recommendations
Avoid using the machine in bad weather conditions especially when there is a risk of
lightning.

OTHER SAFETY INSTRUCTIONS

a) To prevent dust irritation the wearing of a face mask is recommended.
b) Operate the appliance only in daylight or in good artificial light.
c) Keep all cooling air inlets clear of debris.
d) Never blow debris in the direction of bystanders and animals.
e) Operate the machine only at reasonable hours – not early in the morning or late at
night when people might be disturbed.
58 59