Bluetooth ® Pairing - Hama Gentleman-S Mode D'emploi

Note – Charging
• It takes approx. 2 hours to completely charge the
product.
• The speaker's battery can be charged whether the
speaker is on or off.
• If the battery capacity is less than 10%, the
speaker will emit two acoustic signals. You will
only receive this information if the speaker is on.
• The actual battery life varies depending on use of
the device, the settings and the ambient conditions
(rechargeable batteries have a limited service life).
4.3 Bluetooth
pairing
®
Note
• Check whether your mobile device (MP3 player,
mobile phone, etc.) is Bluetooth
• Note that the maximum range for Bluetooth
10 metres without obstacles such as walls, people,
etc.
• Make sure that your Bluetooth
device is on and Bluetooth
• Make sure that the speaker is located within the
Bluetooth range of max. 10 metres.
®
• Switch on the speakers as described in 4.1
Switching the product on and off.
• The status LED (1) begins to flash. The speaker
searches for a connection.
4
capable.
®
is
®
capable terminal
®
is activated.
®
• Open the Bluetooth
®
and wait until Hama Gentleman-S appears in the
list of Bluetooth
devices found.
®
• Select Hama Gentleman-S and wait until the
speaker is listed as connected in the Bluetooth
settings on your terminal device. An acoustic signal
confirms that connection was successful.
• The status LED (1) now remains red.
Note – Bluetooth
• Some terminal devices require a password in order
to connect to another Bluetooth
• If your terminal device requests a password for
connection to the speaker, enter 0000.
Note – Connection to a new device
• If you want to connect a new Bluetooth
device to the speaker, press the Bluetooth
function button (1) until the status LED (1)
begins to flash blue and an acoustic signal
sounds..
• The current connection is disconnected and the
search for new terminal devices starts.
• The speaker always stores the last eight terminal
devices paired.
• The speaker will automatically connect to the last
terminal device paired when it is switched on the
next time.
settings on your terminal device
password
®
device.
®
terminal
®
®
®