4.7 Hands-free function
You can use the speaker as a hands-free set for your
mobile phone. For this function, the mobile phone must
be connected to the speaker via Bluetooth
• Press the function button
incoming call.
• Press and hold the function button
2 seconds to reject an incoming call.
• During a call, press the function button
end the call.
Note – Call quality
To increase the call quality, make sure that you are
near the speaker with your mobile phone during the
call.
5. Operation – NFC connection
Note
• To be able to connect your terminal device to
the speaker using NFC, your terminal device
must be compatible with NFC technology. For
more information, please refer to the operating
instructions of your terminal device.
• Note that the presence of mobile phone cases,
covers or other materials between the speaker and
the back of your terminal device can interfere with
connection or even prevent it.
• Note that NFC has a short transmission range of
about 10 cm.
6
.
®
(5) once to answer an
►
(5) for approx.
►
(5) once to
►
• Switch on the speaker as described in 4.1 Switching
the product on and off .
• Make sure that the NFC function on your terminal
device is turned on and the terminal device is not in
lock mode (lock screen).
• Hold your terminal device in front of the NFC
connection area (8), marked by the NFC symbol
on the speaker's device label.
• Place the connected terminal device next to the
speaker.
6. Care and Maintenance
• Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents.
7. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides
no warranty for damage resulting from improper
installation/mounting, improper use of the product or
from failure to observe the operating instructions and/
or safety notes.
8. Service and Support
Please contact Hama Product Consulting if you have
any questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com