Timer Operation - Danby DAS090BAHWDB Manuel D'utilisation

OPERATING INSTRUCTIONS

TIMER OPERATION

To set the Auto-off timer:
• Ensure the appliance is turned on
• Press the TIMER OFF button and the Timer Off
indicator will illuminate
• Press the TIMER OFF button to select the desired
amount of hours before the appliance turns off
To set the Auto-on timer:
• Ensure the appliance is turned on
• Press the TIMER ON button and the Timer On
indicator will illuminate
• Press the TIMER ON button to select the desired
amount of hours before the appliance turns on
Notes:
• The TIMER ON and TIMER OFF buttons will
increase the time in 0.5 hour increments up to
10 hours and then in 1 hour increments up to 24
hours
• The display will revert back to showing the
previous temperature setting if the appliance does
not receive a signal within a 5 second period
during programming
• Turning the appliance on or off at any time or
adjusting the timer setting to 0.0 hours will cancel
the TIMER settings
Using the TIMER ON and TIMER OFF feature at the
same time
The appliance can be set to turn on and run for a
set period of time and then turn off again by using
the TIMER ON and TIMER OFF features at the same
time. Keep in mind that the hours displayed on the
appliance refer to the number of hours that will pass
from the current time before the action is taken.
For example:
• First, set the Auto-off timer
• Ensure the appliance is turned on
• Press the TIMER OFF button and the Timer Off
indicator light will illuminate
• Press the TIMER OFF button to select the desired
amount of hours before the appliance turns off
• Press the TIMER ON button within 5 seconds and
the Timer On indicator light will illuminate
• Press the TIMER ON button to select the amount
of hours before the appliance turns back on
Note: If the TIMER OFF function and the SLEEP
function are used at the same time, the appliance
will only implement the setting whose duration is
shorter.
If the TIMER OFF function is set for less than seven
hours, the TIMER OFF will turn the appliance off
before the SLEEP function can complete its cycle.
If the TIMER OFF function is set for more than seven
hours, the SLEEP function will turn the appliance off
before the TIMER OFF can complete its cycle.
6