Canon IR1018 Série Guide De Démarrage Rapide page 6

Connect the Telephone Cables (iR1022F/1022iF Only)
C
B
A
Connect the supplied telephone cable to the line
jack (A) and the wall jack.
Connect your external telephone to the external
device jack (B) if required.
If you have the optional handset, connect the cable
to the handset jack (C).
3
A
Screw the bracket onto the machine with the
screws (A).
9
Users in UK:
If required, use a separately available B.T.
adaptor to connect an external device.
4
Place the handset on the cradle.
NOTE
If using the handset or an external telephone, make
sure to set the fax receive mode to <FaxTel> or
<Manual>. For how to set the receive mode, see "Set
the Receive Mode," on p. 22.
Install Handset (Optional)
1
Use a screwdriver to remove the cover on the
right side of the machine.
2
B
A
Screw the handset cradle onto the bracket with
the screws (A). Make sure the groove (B) side
of the cradle faces to the left.
10