Setting Beverage Parameters And Range; Temperature Setting - Hendi 208854 Mode D'emploi

BEVERAGE SETTING
• This chapter will instruct you how to set beverages. The
setting parameters include coffee strength, volume of
coffee, temperature of hot water, volume of hot water,
time of making hot milk, time of making hot cream.
• The parameters accomplished by beverage setting will
be the default values for each beverage.

SETTING BEVERAGE PARAMETERS AND RANGE

The parameters as strength, volume, temperature and time
can be set for the beverages bellow.
• The strength and volume of espresso can be set
• The strength and volume of long coffee can be set
• The strength and volume of coffee part in cappuccino
can be set. Milk foam making time can be set
• The strength and volume of coffee part in latte can be
Drinks
espresso
long coffee
cappuccino
coffee Latte
hot water
hot milk
hot cream

TEMPERATURE SETTING

• The coffee temperature can be adjusted to meet your favor with the "Temperature
setting" function and you can choose:
1. Low
2. Middle
3. High
The default temperature is middle, and it's only workable for coffee not milk.
Strength
Mild:
Normal:
Strong:
Mild:
Normal:
Strong:
1. Epresso setting
2. Long coffee setting
3. Hot water setting
4. Cappuccino setting
5. Coffee latte setting
6. Hot milk setting
7. Hot cream setting
set. Milk and milk foam making time can be set
• The temperature and the volume of hot water can be set
• Hot milk making time can be set
• Hot cream making time can be set
Please read the following table for the detail setting pa-
rameters and adjustment range
Volume
Volume: 25 -120ML
Volume: 25 - 240ML
Volume: 25 - 240ML
Milk time: 3 - 120SEC
Cream time: 3 - 120SEC
Volume: 25 -450ML
Milk time: 3 -120SEC
Cream time: 3 -120SEC
EN
13