Delivery Scope; Declaration Of Conformity; Noise/Vibration Information - Bosch PST Easy Notice Originale

OBJ_BUCH-2486-003.book Page 10 Wednesday, January 20, 2016 1:01 PM
10 | English
Symbol Meaning
Reaction direction
Next step of action
Prohibited action
Correct result
Extraction
Sawdust blower device
Switching On
Switching Off
On/Off switch lock-on
When sawing metal, apply coolant/
lubricant alongside the cutting line
Saw with moderate pressure in or-
der to achieve optimal and precise
cutting results.
Article number (10-digit)
P Rated power input
1
n Stroke rate at no-load
0
Cutting depth, max.
Wood
Aluminium
Metal
Particle board
Weight according to
EPTA-Procedure 01:2014
L Sound pressure level
pA
L Sound power level
wA
K Uncertainty
a Vibration total value
h
Symbol for protection class II (com-
/II
pletely insulated)
1 609 92A 1PR | (20.1.16)

Delivery Scope

Jigsaw.
"Cut Control", splinter guard, application tools and other
accessories shown or described are not part of the standard
delivery scope.
A complete overview of accessories can be found in our
accessories program.
Intended Use
The machine is intended for making separating cuts and cut-
outs in wood, plastic, metal, ceramic plates and rubber while
resting firmly on the workpiece. It is suitable for straight and
curved cuts with mitre angles to 45°. The saw blade recom-
mendations are to be observed.
Technical Data
The technical data of the machine are listed in the table on
page 140.
The values given are valid for a nominal voltage [U] of 230 V.
For different voltages and models for specific countries,
these values can vary.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, until
19 April 2016: 2004/108/EC, from 20 April 2016 on:
2014/30/EU, 2006/42/EC including their amendments and
complies with the following standards: EN 60745-1,
EN 60745-2-11, EN 50581.
Technical file (2006/42/EC) at:
Robert Bosch Power Tools GmbH, PT/ETM9,
70538 Stuttgart, GERMANY
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
Stuttgart, 01.01.2017

Noise/Vibration Information

The measured values of the machine are listed in the table on
page 140.
Sound emission values determined according to
EN 60745-2-11.
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-11.
Bosch Power Tools