Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Before using for the first time
en
Special accessories
You can buy accessories from the after-sales service.
Accessories
Enamel baking tray
Universal pan
Baking and roasting shelf For ovenware, cake tins, joints, grilled
Wok ring
Telescopic shelf set
--------
14
Description
For tray bakes and small baked prod-
ucts.
Customer service number:
11012235
For moist cakes, pastries, frozen
meals and large roasts.
The universal pan can be used to
catch dripping fat when you are grill-
ing directly on the wire rack.
After-sales service number:
11012236
items, frozen meals.
After-sales service number:
11012237
Attachment for a wok; for placing on
the wok burner.
When using the wok attachment, it is
possible to use cooking vessels with a
diameter greater than 26 cm (woks,
frying pans, pots, vessels with a
curved base, etc.).
After-sales service number:
00745721
Telescopic shelf set for one level.
After-sales service number:
12006236
KBefore using for the first
time
I n this section, you can find out what you must do
B e f o r e u s i n g f o r t h e f i r s t t i m e
before using your oven or hob to prepare food for the
first time. Read the following section beforehand.
~ "Important safety information" on page 5
Remove the appliance packaging and dispose of it
appropriately.
Baking out the oven
Precleaning the oven
Remove accessories and hook-in racks from the
1.
cooking compartment.
Fully remove any remaining packaging, such as
2.
small pieces of polystyrene, from the cooking
compartment.
Some parts are covered with a protective film.
3.
Remove the protective film.
Clean the outside of the appliance with a soft, damp
4.
cloth.
Clean the cooking compartment with hot soapy
5.
water.
Heating up the oven
To remove the new cooker smell, heat up the oven
when it is empty and closed.
Turn the temperature selector to the maximum
1.
temperature.
Switch off the oven after 45 minutes.
2.
Recleaning the oven
Clean the cooking compartment with hot soapy
1.
water.
Fit the hook-in racks.
2.
Cleaning the burner caps and cups
Clean the burner caps (A) and cups (B) with water
1.
and washing-up liquid.
Dry the parts well.
2.
Place the burner cup (B) onto the burner (C).
3.
Position the burner cap (A) exactly on the burner
4.
cup (B).
Publicité
Table des Matières
