Installing The Microphone - Sony XAV-AX210 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installing the microphone

To capture your voice during handsfree calling, you
need to install the microphone .
Clip (not supplied)
Cautions
• It is extremely dangerous if the cord becomes
wound around the steering column or gearstick.
Be sure to keep it and other parts from interfering
with your driving operations.
• If airbags or any other shock-absorbing
equipment are in your car, contact the store where
you purchased this unit or the car dealer before
installation.
Note
Before attaching the double-sided tape , clean the
surface of the dashboard with a dry cloth.
34
GB
Using the wired remote control
When using the steering wheel remote
control
Installation of the connection cable RC-SR1 (not
supplied) is required before use.
1
To enable the steering wheel remote control, select
[General Settings]  [Steering Control Custom] to
make the registration (page 18).
When the registration is complete, the steering
wheel remote control becomes available.
Notes on installing the connection cable RC-SR1 (not
supplied)
• Refer to the support site on the back cover for details then
connect each lead properly to the appropriate leads.
Making an improper connection may damage the unit.
• Consulting the dealer or an experienced technician for
help is recommended.
• When connecting the iDataLink Maestro module (not
supplied), do not connect any device to the REMOTE
terminal (blue). Likewise, when connecting a device to the
REMOTE terminal (blue), do not connect the iDataLink
Maestro module (not supplied) to the IDATA LINK I/F
terminal (black).
When using the wired remote control
1
To enable the wired remote control, set [Steering
Control] in [General Settings] to [Preset] (page 18).
Using the rear view camera
Installation of the rear view camera (not supplied) is
required before use.
The picture from a rear view camera connected to
the CAMERA IN (REAR) terminal is displayed when:
 the back lamp of your car lights up (or the shift
lever is set to the R (reverse) position).
 you press HOME, touch [Camera], then touch
[Rear].

Publicité

Table des Matières
loading

Table des Matières