Table des Matières
Publicité
Operating elements
Ref.
Button
Operational display
1
2 3
4
(Ill.: Front operating elements)
Description
You will start the OSD (On Screen Display) with this button. Press this button
again if you wish to leave the OSD.
+
Power block, when the OSD is not activated
+
OSD block, when the OSD is not activated
Hold the key combination until the bar siplayed has moved from left to right
completely, to activate/de-activate the block. A corresponding message will
appear on the screen.
Select a parameter and reduce its value with this button, when the OSD is
switched on.
If you are not in the OSD: Direct call-up of the Contrast/Brightness menu.
Select a parameter and increase its value with this button, when the OSD is
switched on.
If you are not in the OSD: Direct call-up of the Contrast/Brightness menu.
Confirm the selection of the parameter to be changed with this button.
If you are not in the OSD: Automatic adjustment
You can switch the TFT monitor on or to the Standby mode with this button.
Shows the operational state. Please also refer to page 14.
English
5 6
DE
EN
FR
ES
DK
NL
11
Publicité
Table des Matières
