Feature Menu - Grandin LV32W10 Mode D'emploi

Feature Menu

Movie Sense (optional)
Press " " or " " button to select Movie Sense.
Use " " or " " to set Movie Sense Low, Med, High or
Off. While Movie Sense is active, it will optimize the
TV's video settings for motional images to acquire a
better quality and readibility.
When Movie Sense option is set to Low, Med or High,
Movie Sense demo option will be available. If one of
these options is selected and if you press OK button,
then the demo mode starts. While demo mode is
active, the screen will be divided into two sections,
one displaying the movie sense activity, the other
displaying the normal settings for TV screen.
Notes.
• Movie Sense works while watching 24-frame
broadcasts.
• Movie Sense feature will not be available while
Game Mode is set as On. If you switch to any other
source and set Movie Sense as on, Game Mode will
automatically set as Off.
Pip-Pap
In the Feature menu, highlight PIP item by pressing
" " or " " buttons. Press " " button to enter PIP
submenu:
Using " " or " " button, you can switch to PIP, PAP
mode or turn off the feature.
If the TV is switched to PIP or PAP mode, Pip-Pap
submenu will change accordingly and the following
settings will appear on the same menu screen.
02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32875W_1205UK_10064576_50158417.indd 61
Note that if you switch to PAP mode by using Pip-Pap setting,
only Source and Swap options will be active among the
menu settings.
Pip-Pap
This line controls Pip/Pap modes. Use " " or " "
buttons to switch the TV to Pip , Pap or Off .
Pip Size
Using this setting, you can set the size of the Pip
window. Press " " or " " button to highlight Pip
Size item. Use " " or " " button to set Pip Size to
Small or Large.
Note : This setting will be inactive if the TV is set to Pap
mode.
PIP Position
This setting is used for moving the sub picture.
Select PIP Position
" " button. Use " " or " " button to adjust PIP
position.
Positions available are: Bottom Right,Bottom Left, Top
Left and Top Right.
Source
PIP Source setting enables you to select the source
of the sub picture.
Select PIP Source item by using " " or " " button.
Use " " or " " button to set PIP source.
Program
This setting will be unavailable to be used.
Swap
Select Swap item by using " " or " " button. Use
" " or " " button to set. This function enables to swap
between the main and the PIP picture.
Note : See Appendix E for all PIP/PAP modes.
Sleep Timer
Press " " or " " button to select Sleep Timer . Use
" " or " " button to set the Sleep Timer.
The timer can be programmed between Off and 120
minutes in steps of 10 minutes.
If Sleep Timer is activated, at the end of the selected
time, the TV goes automatically to standby mode.
Child Lock
Press " " or " " button to select Child Lock .
Use " " or " " button to set the Child Lock On or Off .
When On is selected, the TV can only be controlled
by the remote control handset. In this case the control
panel buttons (except for the STANDBY button) will
not work.
Hence, if one of those buttons is pressed, Child Lock
On will be displayed on the screen when the menu
screen is not visible.
English - 61 -
item by using " " or
29.10.2009 08:45:55