Grandin LV32W10 Mode D'emploi page 62

Balance
This setting is used for emphasizing left or right
speaker balance.
Press " " or " " button to select Balance. Press "
" or " " button to change the level of the balance.
Balance level can be adjusted between -32 and +
32.
Headphone
Press " " or " " button to select Headphone . Press
" " button to view the headphone menu.
Headphone sub-menu options are described below:
Volume
Press " " or " " button to select Volume . Press "
" button to increase headphone volume level. Press
" " button to decrease headphone volume level.
Headphone volume level can be adjusted between
0 and 63 .
Headphone Sound (optional)
Press " " or " " button to select Headphone Sound .
Using " " or " " button, you can select Main, PIP/PAP,
Active or Inactive.
Main : Main window sound.
PIP/PAP : PIP/PAP window sound.
Active : Sound of the current selection.
Inactive : Sound of the currently inactive window.
Sound Mode (optional)
Press " " or " " button to select Sound Mode . Using
" " or " " button, you can select Mono, Stereo, Dual I
or Dual II mode, only if the selected channel supports
that mode.
AVL
Automatic Volume Limiting (AVL) function adjusts the
sound to obtain  xed output level between programmes
(For instance, volume level of advertisements tend to
be louder than programmes).
Press " " or " " button to select AVL . Press " " or
" " button to set the AVL as On or Off .
SRS TruSurr XT (optional)
By pressing " " or " " select SRS TruSurr XT .
Press " " or " " button to set SRS TruSurr XT as
on or off.
Note: If you set SRS TruSurr XT as On, some features in the
Sound menu can be unavailable to be set.
Spdif Out (optional)
Press " " or " "" button to select Spdif Out . Press "
" or " " button to set the Spdif Out as On or Off .
Audio Out (optional)
Press " " or " " button to select Audio Out. Press "
" or " " button to set the Audio Out as Speaker or
LineOut/SPDIF.
02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32875W_1205UK_10064576_50158417.indd 60
If you select to Audio Out as LineOut/SPDIF, you will
get audio through the active audio connectors. In this
case, audio output will not be available through TV
speakers and mute function cannot be used.
While LineOut/SPDIF is activated, if you press volume
" " / " " or mute button on your remote control,
the Audio Out indicaticator will be displayed on the
screen.
If you select to Audio Out as "Speaker" by using
" " or " " button, you can get audio through the
TV's speakers.
Dolby Virtual Speaker (optional)
This feature is used to create the impression that
sound is coming from around the room instead of the
set speakers. Pressing the " " or " " buttons will turn
the feature on or off.
Note: If you set Dolby Virtual Speaker as On, some features
in the Sound menu can be unavailable to be set.
Dolby VS (optional)
This feature is used to create the impression that
sound is coming from around the room instead of the
set speakers. Press " " / " " buttons to set Dolby
Virtual Speaker as Off, Wide or Reference.
Note: If you set Dolby VS as On, some features in the Sound
menu can be unavailable to be set.
Dolby VS Mode (optional)
If you set Dolby VS as Reference or Wide, Dolby VS
Mode options will be available to be set as Movie or
Music. Use " " or " " button to select.
Effect (optional)
If you are watching a mono broadcast, set Effect on to
obtain a better sound effect which will be more stereo-
like. If the current sound system is stereo, switching
this effect on will give a more spatial effect.
Press " " or " " button to select Effect. Press " "
or " " button to set as On or Off .
Dynamic Bass (optional)
Dynamic Bass is used to increase bass effect of the
TV set. Press " " or " " button to select Dynamic
Bass. Use " " or " " button set Dynamic bass as
On or Off. It is not recommended to select High while
listening at high volume levels.
Store
Press " " or " " button to select Store. Press " "
or OK button to store the settings. " Stored... " will be
displayed on the screen.
English - 60 -
29.10.2009 08:45:54