Viewing The Connections - Side Connectors; Power Connection; Aerial Connection - Grandin LV32W10 Mode D'emploi

Viewing the Connections - Side Connectors

1. CI Slot is used for inserting a CI card. A CI card allows you to view all
the channels that you subscribe to. For more information, see "Common
Interface" section.
2. Side USB input .
Note: Codec update cannot be performed.
3. Headphone jack is used for connecting an external headphone to the
system. Connect to the HEADPHONE jack to listen to the TV from
headphones (optional).
4. Video Input is used for connecting video signals of external devices.
Connect the video cable between the VIDEO IN socket on the TV and the
VIDEO OUT jack on your device.
5. Audio Inputs are used for connecting audio signals of external devices.
Connect the audio cable between the AUDIO INPUTS on the TV and the
AUDIO OUTPUT jacks on your device. Note: If you connect a device to
the TV via the VIDEO INPUT, you should also connect your device with
an audio cable to the AUDIO INPUTS of the TV to enable audio.

Power Connection

IMPORTANT : The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains.
• Plug the power cable to the mains socket outlet.

Aerial Connection

• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32875W_1205UK_10064576_50158417.indd 45
English - 45 -
29.10.2009 08:45:42