Hansgrohe Axor Montreux 16520 1 Série Instructions De Montage / Mode D'emploi / Garantie page 6

1
2
3
6
English
Installation
Install the drain pull rod (not included with
#16506xx1, 16806xx1).
Place the faucet and the sealing washer on the
mounting surface.
Install the fiber washer, metal washer and mounting
nut.
Tighten the collar nut by hand.
Tighten the tensioning screws.
Connect the supply hoses to the stops.
Use two wrenches, as shown, to pre-
vent the hoses from twisting.
A twisted hose may become loos-
ened from the faucet, causing a leak.
Turn on the water and check all connections for leaks.