Hansgrohe Axor Starck 10111 1 Série Instructions De Montage / Mode D'emploi / Garantie page 4

1
3
2
4
9 mm
16 mm
English
Installation
Install the pull rod (not included with 10129xx1 or
10123xx1).
Place the faucet with black sealing ring on top of
the mounting surface.
Install the friction washer, metal washer, and
mounting nut.
Tighten the mounting nut.
Tighten the tensioning screws.
Connect the supply lines to the stops.
Use two wrenches.
Do not allow the hoses to twist.
Install the pop-up drain (not included with
10129xx1 or 10123xx1).