Operating - AEG AG 1208 Mode D'emploi

1 Charging speed selector
left position: gentle charging
right position: quick charging
2 red "PolarITy" led
3 Green "PoWer" led
4 amber "CHarGInG" led
5 Green "full" led

Operating

Start charging (lead-acid batteries)
before connecting the battery be sure the battery selector switch (9) is set to nor-
mal Then select the charging speed with the charging speed selector switch (1) If
the charging device is correctly connected it will automatically start charging this
process is indicated by the Power led (green (3)) and the charging led (yellow
(4))
The charging process is completely automatic and completed when the green full
led (5) lights up The battery is now charged to 100 % and can be disconnected
from the charging device
Start charging (GEL batteries)
before connecting the battery be sure the battery selector switch (9) is set to Gel
Then select the charging speed with the charging speed selector switch (1) If the
charging device is correctly connected it will automatically start charging this pro-
cess is indicated by the Power led (green (3)) and the charging led (yellow (4))
The charging process is completely automatic and completed when the green full
led (5) lights up The battery is now charged to 100 % and can be disconnected
from the charging device
6 Charging cable (-) with charging
clamp (black)
7 Charging cable (+) with charging
clamp (red)
8 Power cable with plug
9 battery selector switch
left position: lead-acid batteries
right position: Gel batteries
GB
25