shark IQ ROBOT RV1000AE Série Guide D'utilisation page 6

PREP YOUR HOME
Your robot uses an array of sensors to navigate around walls, furniture legs, and other obstacles while it
cleans. To prevent the robot from bumping into objects or navigating to areas you don't want it to, use the
included BotBoundary® strips. For best results, prepare your home as indicated below, and schedule a daily
cleaning to ensure all floor areas are regularly maintained.
NOTE: Scheduling can only be done in the app.
OBSTRUCTIONS
Clear cords and small objects
from floors and open doors
to ensure a complete map of
your home.
THRESHOLDS
Your robot may have some
trouble clearing some high
thresholds. Block off high
thresholds with the included
BotBoundary strips.
STAIRS
Your robot's cliff sensors will
prevent it from falling off
ledges. For your robot's cliff
4-inch
Min. sensors to work properly,
all runners, rugs, or carpets
must be at least 4 inches
from any stairs (or extend
over the edge of the stairs.)
WARNING: Do not put BotBoundary strips near any stairs
or cliffs.
WARNING: Do not place BotBoundary strips on top of one
another.
s h a r kc l e a n . c o m
SCHEDULING
For a constant state of clean,
set up a cleaning schedule in
the app.
AVOID MOVING THE
ROBOT OR BASE
While your robot is cleaning,
do not pick it up and move it,
or move the charging base—
As it cleans, your robot will create a map of your
this could impact the robot's
home. It may take several cleanings for the robot to
ability to map your home.
finish its mapping. Once mapping is complete, an
Interactive Map of your floor plan will be available
on the app.
CHECK BASE FILL LEVEL
During the first few weeks,
your robot will empty more
often than usual. Check the
fill level regularly. The dust
bin is designed to hold up
to 30 days' worth of debris,
but home environments
vary, and the bin may fill up
To manually start a cleaning cycle, press the Clean button on the robot or on the mobile app. To stop the
quicker in some homes.
robot before it finishes cleaning and automatically returns to the base, press the Dock button.
NOTE: Be sure to charge the robot completely before its first cleaning so that it can explore, map, and clean as much of
your home as possible. It may take up to 6 hours to fully charge the robot.
NOTE: Avoid pickup up and moving the robot or base. If either are relocated, the robot may not be able to follow its
intelligent cleaning path, or find its way back to the base. If the robot is picked up or moved for any reason, it should be
returned to within 6 inches of its last location.
MAPPING AND NAVIGATION
Living Room
The interactive map in the app allows you to name
rooms, then select which rooms to clean, and send
the robot to clean one specific location.
As cleanings continue, the robot will update and
refine its path to provide optimized cleaning coverage.
After each use, a cleaning report will be available
in the app.
MANUAL CLEANING MODE
Dining Room
Kitchen
s h a r kc l e a n . c o m