Quick Guide - Bosch+Sohn boso medicus family Mode D'emploi

Quick guide

➡ Insert batteries, ensure correct positio-
ning (P. 46)
➡ Connect cuff to monitor (P. 50)
➡ Attach cuff (P. 51)
➡ Start (and stop) a measurement by
pressing the appropriate start/stop
button (P. 54)
Measured systolic, diastolic and pulse
values are displayed after the measure-
ment is completed (P. 56)
➡ Retrieving values from memory (P. 58):
with the instrument switched off, press
the start/stop button until "M" is dis-
played. The first value displayed is the
average value of all stored measure-
ments together with the WHO classifi-
cation.
The total number of stored measure-
ments is displayed at the same time,
e.g. "A30". The individual measure-
ment values are then displayed in
sequence.
This quick guide does not replace the
detailed information on the use and
safety of the blood pressure monitor fea-
tured in the user instructions.
Please be sure therefore to read
the user instructions!
GB
41