Variable-Speed Trigger Switch; Led Light - Skil DL527502 Guide D'utilisation

Variable-Speed Trigger Switch

Your tool is equipped with a variable-speed
trigger switch. The tool can be turned "ON"
or "OFF" by depressing or releasing the vari-
able-speed trigger switch.
The variable-speed trigger switch delivers high-
er speed with increased trigger pressure and
lower speed with decreased trigger pressure
(Fig. 4).

LED Light

Your tool is equipped with an LED light, located
on the base of the tool. This provides additional
light on the surface of the work piece for
operation in lower-light areas.
The LED light will automatically turn on with a
slight squeeze on the variable-speed trigger
switch before the tool starts running, and will
turn off 8 to 12 seconds after the variable-
speed trigger switch is released.
The LED light will rapidly flash when the tool
and/or battery pack becomes overloaded or too
hot, and the internal sensors will turn the tool
off. Rest the tool for a while or place the tool
and battery pack separately under air flow for
to cool them.
The LED light will flash more slowly to indicate
that the battery is at low-battery capacity. Recharge the battery pack.
Fig. 4
Variable-Speed
Trigger Switch
Fig. 5
13