Description Of The Control Panel - Clatronic BBA 2605 Mode D'emploi

5....-05-BBA 2605-GB1 19.05.2003 12:26 Uhr
Insert the plug into a properly installed 230V/50Hz protective contact socket.
1. DISPLAY
NORMAL SETTING
This displays signals when the appliance is ready for use. It corresponds to the normal program. "1 3:00" appears
on the display. The "1" specifies which program has been chosen and the "3:00" is the length of the program. The
positions of two arrows provide information on the selected browning level and the weight. The basic setting after
switching the appliance on is: "superior weight" and "medium browning level". During operation the course of the
program can be read on the display. As the program proceeds the digits of the set time will decrease progressi-
vely.
2. START/STOP key
To start and stop the program. As soon as the START/STOP key is pressed, the points of the time value start to
blink. Use the START/STOP key to stop the program in any moment. Keep the key pressed until a signal beep is
heard. The starting position of the aforementioned start program appears on the screen. If a different needs to
be used, select it with the SELECTION key.
3. TIME keys
The following programs can be started with the timer: normal, white bread, sweetbread, dough, marmalades,
cakes, sandwiches and baking. The RAPID and ULTRA-RAPID programs can be started with the timer. The
hours and minutes after which the preparation should be started need to be added to the relevant basic time for
the specific program plus 1 hour of warming time (after the end of the baking process). A maximum timing of 13
hours can be set.
Example: It is 8.30 p.m. and the bread must be ready the next morning by 7.00 a.m., i.e. in 10 hours and 30
minutes. Press the TIME key until 10.30 appears, that is to say the time between now (8.30 p.m.) and when the
bread must be ready.
When working with the timing function never use perishable ingredients such as milk, eggs, fruit, yogurt, onions,
etc.!
4. COLOR key
The desired browning level is set with this key: LIGHT – MEDIUM – DARK.
5. DOUGH QUANTITY key
It provides for the following settings in the various programs (see table):
LEVEL I = for small bread weights up to 750 g.
LEVEL II = for large bread weights up to 1000 g.
In the recipes you will find our recommended quantities.
6. SELECTION key
Use this menu key to run one of the available programs described in detail in the „Bread Baking Machine
Program Phases" table. Use the programs for the following specialties:
1. NORMAL
2. WHITE BREAD
3. WHOLEMEAL
4. RAPID
5. SWEETBREAD
6. ULTRA-RAPID I:
7. ULTRA-RAPID II:
8. DOUGH
9. MARMALADE
10.CAKE
11. SANDWICH
12.BAKING
18
Seite 18

Description of the Control Panel

For white and wheat and rye bread. This program is used the most.
For the preparation of particularly light white bread
For wholemeal bread
For the quick preparation of white and wheat and rye bread
For the preparation of sweet leavened dough
for the kneading and baking of bread loafs of up to 750 g.
for the kneading and baking of bread loafs of up to 1000 g.
For the preparation of dough
To cook marmalades and jams
For cakes with baking powder
To prepare light sandwich bread
To brown bread or cakes