Hapro Luxura GT Mode D'emploi page 18

Reset hour counter for the lamps
+
CONTROLE
Attention:
If one of the error messages appears on the display, you should stop using the sunbed, unplug the appliance and contact your
dealer.
18
1: ENG L
1: ENG L
+
The hour counter for the lamps should be reset after replacing the lamps.
5 sec.
Keep the <7>, <9> and the <14> buttons pressed simultaneously for 10 seconds.
Reading the appliance hour counter
The hour counter is read by simultaneously pressing the <7> and the <5> buttons for 3 seconds and keeping them
pressed.
The code "HL" will appear at the top of the display and the number "0" will scroll at the bottom.
+
3 sec.
1: ENG R
1: E