Avintage AVU8X Notice D'utilisation page 56

Cave de service pose libre et encastrable
Masquer les pouces Voir aussi pour AVU8X:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Shelves
To prevent damage to the door seal, ensure that the door is fully open before pulling out the
shelves to add or remove bottles.
For easier access to the contents of the shelves, slide the shelf out approximately one third of the
way. The shelves are, however, fitted with a stop to prevent the bottles falling out.
To remove or reposition the shelves, incline the shelf as indicated in the diagram, then push or pull
as required.
For AVU41SXDPA(/IX)
Place the shelves in the spaces provided.
a. Spare part cardboard box
1. After removing the wrapping, take the spare parts cardboard box (a) out of the cabinet.
2. There are four small shelves (b) in the left compartment. Remove the two lower shelves.
3. There are four large shelves(c) in the right compartment. Remove the two upper shelves.
4. Swap the large and small shelves (fig 2). Place the two small shelves in the upper positions and
the two large shelves in the lower positions in both compartments.
5. When the shelves have been positioned correctly, you can use the wine cooler according to the
instruction manual.
b. Small shelf
c. Large shelf
56

Publicité

Table des Matières
loading

Table des Matières