Avintage AVU8X Notice D'utilisation page 52

AVU53CDZA AVU54SXDZA(/IX) PRO51C/1
1. Lower hinge (right)
4. Door
7. Top hinge (left)
1. Open the door to 90 degrees, take out two screws (2) from the lower door axis (3), remove the
door (4) and door axis (Fig. A).
2. Position the door (4) safely.
3. Take out three hinge screws (6) from the top hinge (right) (5) and remove it. (Fig. C)
4. Remove the decorative nail (8) from the top left of the cabinet and install the spare top hinge (Left)
(7) on the top left of the cabinet with three screws. (Fig. D)
5. Install the spare lower hinge (left) (9) according to the above procedure. (Fig. E)
6. The door opens to 180 degrees. Install the door in the same way as it was removed and fix it so
that the door is aligned.
7. Block the hole at the top right of the cabinet with the spare decorative nail (8).
2. Screws
5. Top hinge (right)
8. Decorative nail
3. Door axis
6. Hinge screws
9. Lower hinge (left)
52