Avintage AVU8X Notice D'utilisation page 53

4. OPERATING INSTRUCTIONS
It is recommended that you installed your appliance in a place where the ambient temperature is
between 16-32°C. If the ambient temperature is above or below recommended temperatures, the
performance of the unit may be affected and it may not be possible to obtain temperature between 5-
18°C or 5-10°C/10-18°C (depending on the model).
AVU8X(/IX) / AVU23SX(/IX) AVU41SXDPA(/IX) AVU52SX(/IX) PRO51C/1
 "RUN"
Power indicator

button
To turn the appliance on or off.
Press and hold this button for around 3 seconds.

button
Inner lighting control button
 Display
Electronic temperature display

button
+ temperature setting button

button
- temperature setting button
 You can choose the desired chamber temperature by using the "
temperature selected increases/decreases by 1°C with each button press.
Temperatures between 5 and 18°C or between 5 and 10°C / 10 and 18°C (depending on the model)
can be selected. Once the desired temperature has been selected, the display will flash for 5s before
showing the current internal cooler temperature. The set temperature can be viewed at any time by
pressing and holding the temperature select buttons for 5s.
In the event of a power cut, all previously selected temperature settings will be deleted and each
chamber will re-initialize to the factory-preset temperature of 12°C.
/ " buttons. The
53