JVC AV-32WFT1EP Manuel D'instructions page 29

           



   



                                   




                                                                               
You can transmit to the latest Programme numbers (PR) data
to the VCR with the T-V LINK function.
Caution:
• Only when the T-V LINK compatible VCR is connected to
the EXT-2 terminal, this operation is enabled.
• Only when the T-V LINK menu is being displayed, this oper-
ation is enabled.
1
Turn on the VCR.





2
Press the
The data transmission begins.
The T-V LINK menu disappears once the data transmis-
sion ends.
When the T-V LINK menu is changed over to
another menu:
The menu operation at the TV side is completed and it is
shifted to the menu operation at the VCR side. Refer to
the VCR Instruction Manual and operate the VCR.
Note:
• If "FEATURE NOT AVAILABLE" appears at the T-V
LINK menu, ensure the following three items are cor-
rect; then press the
sion.
− Has the T-V LINK compatible VCR been connect-
ed to the EXT-2 terminal?
− Has the VCR power been turned on?
− Does the SCART cable that is connected to the
EXT-2 terminal to T-V LINK compatible VCR have
all proper connections?
                                            
               
After the AUTO PROGRAM function is completed, you can
change the country you have already set by using the AUTO
PROGRAM function.
When registering the TV channels for French broadcast
stations (SECAM-L system), perform this operation to change
the country.
1
Display the INSTALL menu.
When the EDIT menu is currently being dis-
played:
 
 
Press the
menu.


button.
   
button to retry data transmis-
           
 
(Information) to return to the INSTALL





2
Press the buttons to choose AUTO
PROGRAM. Then press the
A COUNTRY menu appears as a sub-menu of the
AUTO PROGRAM function.
   
3
Press the and the
choose a country.






4
Press the button to complete the set-
ting.
The menu disappears.
To return to the INSTALL menu from the COUNTRY
menu:
 
 
Press the (Information) button instead of the
button.
                                            ! ! ! !     " " " " # # # #
$ $ $ $ % % % %     & & & &                
When connecting a Decoder with a T-V LINK compatible VCR
connected to the EXT-2 terminal, use the DECODER (EXT-2)
function to unscramble the scrambled TV channels.
1
Turn on the Decoder power.
2
Display the TV channel capable of being
unscrambled with the Decoder on the TV.
Even if the Decoder is functioning, a scrambled picture
appears at this time.






3
Press the button to display the MENU.
The MENU (main menu) appears.
4




Press the buttons to choose FEA-
TURES. Then press the
The FEATURES menu appears.



5


Press the buttons to choose DECOD-
ER (EXT-2) . Then press the
choose ON.
An unscrambled picture appears.
To cancel the DECODER (EXT-2) function:
 
 
Press the buttons to choose OFF.

 





button.





buttons to










button.
   
buttons to