Transport; Storage; Recycling Or Disposal Of Your Machine - Garland CHOPPER 406 VE Manuel De L'utilisateur

9. TRANSPORT

Before transporting the machine, always disconnect
the machine. Always transport the machine with the
motor stopped.
Before moving the machine, be sure to tie the two
control levers together to avoid the outward balancing
movements accidentally injure people, cause damage
or other machines that are close.
To avoid leakage of hydraulic oil, never carry the
bandsaw on its side and tighten the bleed screw.
Always let the blade down for transport.
To transport the appliance use the same wheels. Hold
the appliance by the handle and pull.
If you have to raise the machine check the weight of
the machine in the technical characteristics before
lifting it to ensure that it is a weight that you can
withstand.
If you are transporting the machine in a vehicle ground
it firmly to prevent slipping or tipping over.

10. STORAGE

Store this tool in a place not accessible to children
and safe so that does not endanger any person and
make it dry, clean and at a temperature between 0°C
and 45°C.
Before storing the machine follow the maintenance
chapter points.
Always unplug the machine before storing it. Remove
the plug from the power supply before storing the
machine.
Tighten the bleed screw to avoid leaks of the
bandsaw's oil trap.
11. RECYCLING OR DISPOSAL OF
YOUR MACHINE
Protect the environment. Recycle this machine's used
oil by taking it to a recycling center. Do not pour used
oil in drains, land, rivers, lakes, or seas.
Dispose of your appliance sustainably.
We should not get rid of machines
with domestic waste. Plastic and metal
components can be classified according to
their nature and recycled.
The materials used to pack this machine
are recyclable. Please do not throw the
packaging away with domestic trash. Throw
these packages away at an official collection point.
45/120
English