Residual Risk Factors - Garland CHOPPER 406 VE Manuel De L'utilisateur

English
or locked, that there are no broken parts or other
conditions that may affect the operation of this
machine. Whenever this machine is damaged, repair
it before use. Many accidents are caused by poorly
maintained machines.
If the cutting tool connects with a strange object while
being used, disconnect the machine from the electric
source and inspect the machine before continuing. If
you detect any sign of damage, take your unit to the
technical service.
Before making any adjustments, changing
accessories, cleaning, transportation, or storage of this
machine, turn off and unplug the machine, and make
sure that the cutting tool is stopped. Such preventive
safety measures reduce the risk of accidentally
starting this machine.
Remove the plug from the power source before
making any adjustments, changing accessories, or
storing the machine. Such preventive safety measures
reduce the risk of accidental starting this machine.
If the machine starts to vibrate in a strange way, turn
it off and examine it to find the cause. If you cannot
discover the reason take the machine to the service
technician. The vibrations are always an indication of a
problem in the machine.
In case of prolonged disuse, disconnect the machine
from the energy source.
2.6. SERVICE
Please periodically check your machine by a qualified
repair service using only identical replacement parts.
This will ensure that the safety of this machine is
maintained.

2.7. RESIDUAL RISK FACTORS

Even when using the tool in the prescribed
manner it is not possible to eliminate all residual risk
factors. The following hazards may arise in connection
with the construction and the design of the tool.
Electrical shock due to the poor condition of the
power cord that may cause an electric shock.
Inspect the cable before each use.
Electrical discharge indirectly caused by contact
with metal parts of the machine due to faulty wiring.
Before performing any maintenance on the machine
disconnect the electrical power and connect this
machine to a residual differential device whose
current is less than or equal to 30mA.
You should check the operation of the differential
before using the machine.
Injuries to the user by using the machine without the
proper protective equipment. Remember to always use
protective equipment recommended in this manual.
Injuries to hearing if effective hearing protection is not
used.
Injuries caused by insufficient lighting. Make sure that
you work with proper light. Health problems as a result
of the vibrations produced by the machine if it is used
for a period longer time than recommended or is not
handled properly, or is not well maintained.
Injuries in the hands if adequate protection is not used
or the instructions contained in this manual are not
followed.
32/120