Before Operation - Aiwa NSX-AJ22 Mode D'emploi

BEFORE OPERATION

To turn the power on
Press one of the function buttons (TAPE, TUNER, VIDEO/AUX,
CD). Playback of the inserted disc or tape begins, or the previously
tuned station is received (Direct Play Function).
POWER is also available.
To turn the power off
Press POWER.
When the power is turned on, the disc compartment may open
and close to reset the unit.
DEMO (Demonstration)
When the AC cord is plugged into an AC outlet for the first time
after purchase, the DEMO will begin in the display. When the
power is turned on, the DEMO will end. When the power is turned
off, the DEMO will begin again.
When the clock is set, the DEMO will not begin even if the power
is turned off.
To deactivate or activate DEMO
Press a, and clock is displayed in place of the DEMO.
Press c to activate.
(For more about the DEMO, see page 18)
SETTING POWER ECONOMIZING MODE
When you set power economizing mode to "ECO ON" or "ECO
AUTO", the unit reduces power consumption by conducting four
ECO operations as follows.
ECO ON
• The unit (all the illumination of the display and the buttons)
blacks out when the power is turned off. Only the red indicator
lights up.
• If DIMMER (1-3) is selected, the illumination of the display and
the buttons brighten for 10 seconds only when you press a
button, or turn VOLUME or MULTI JOG.
• The display dimmer mode is set to the dimmest, the button
illumination lights off, and the volume is set to the minimum (0)
when the unit turns on by timer recording.
ECO AUTO
• In addition to the three operations of ECO ON, the unit
automatically turns itself off if you do not operate it and the
sound source is mute for 10 minutes.
ECO OFF
• The power economizing mode does not function.
6
ENGLISH
1 Press ECO.
"ECO MODE" will be displayed.
2 Press ENTER within 4 seconds.
The current power-economizing mode status will be displayed.
3 Turn MULTI JOG within 4 seconds to select one
of the power-economizing mode.
Example: When "ON" is selected
4 Press ENTER within 4 seconds.
If the clock is not set, the unit does not black out. Instead, the
DEMO will begin when the power is turned off.
DIMMER MODE
To change the display dimmer mode
1 Press ECO repeatedly until "DIM MODE" is displayed.
2 Within 4 seconds, press ENTER.
3 Within 4 seconds, turn MULTI JOG to select one of the dimmer
modes changed cyclically as below.
4 Within 4 seconds, press ENTER.
DIMMER 1
DIM-OFF
"DIM-OFF" mode is the brightest and "DIMMER 3" mode is the
dimmest. In "DIMMER 3" mode, the level indicator, the window
of the unit top, and the button illumination light off in addition.
FLASH WINDOW
The window on the top of the unit lights up or flashes while the
unit is being powered on.
To turn off the light of the top window, press s while pressing
CD. To turn back on, repeat the above.
DIMMER 2 DIMMER 3