Télécharger Imprimer la page

Publicité

Liens rapides

Lit de bébé (4781) - Manuel d'assemblage et d'utilisation
Congratulations on purchasing a MDB Family product. This crib will provide many years of service if you adhere
to the following guidelines for assembly, maintenance, and operation. This crib is for residential use only. Any
institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assembling the
crib in addition to the Allen wrench included in the hardware box. Do not use power screwdrivers. All of our cribs
are made from natural woods. Please understand that natural woods have color variations which are the result of
nature and not defects in workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARDWARE.
YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC VARIATIONS.
Nous vous félicitons de votre achat d'un produit familial MDB. Ce lit de bébé vous procurera des années de
service si vous suivez les directives ci-dessous pour l'assemblage, l'entretien et l'utilisation. Ce lit est destiné
uniquement à une utilisation résidentielle. Toute utilisation dans une institution est strictement interdite.
Prenez soin de suivre les instructions pour réaliser correctement l'assemblage. Utilisez un tournevis cruciforme
pour l'assemblage, en plus de la clé hexagonale incluse dans la boîte de quincaillerie. N'utilisez pas un tournevis
électrique. Tous nos lits d'enfants sont fabriqués en bois naturel. Il faut comprendre que le bois présente des
variations de couleur attribuables à la nature et non à un défaut de fabrication.
NE PAS UTILISER DES PIÈCES DE SUBSTITUTION. TOUS LES MODÈLES ONT LE MÊME NOMBRE DE
PIÈCES ET D'ACCESSOIRES DE MONTAGE. VOTRE MODÈLE PEUT DIFFÉRER DE CELUI ILLUSTRÉ EN
RAISON DE VARIATIONS STYLISTIQUES.
* The crib can later be converted
into a toddler bed or a full-size bed.
To convert to a toddler bed, turn to
page 10. To convert to a full-size
bed, turn to page 12.
* Le lit de bébé peut être converti
plus tard en un lit pour tout-petit ou
en un lit à une place. Pour
convertir le lit en un lit pour tout-
petit, passez à la page 10. Pour
convertir le lit en un lit à une place,
passez à la page 12.
revised 24JUN2011
Crib (4781) - Assembly and Operation Manual
page 1

Publicité

loading

Sommaire des Matières pour MDB Family 4781

  • Page 1 Lit de bébé (4781) - Manuel d’assemblage et d’utilisation Congratulations on purchasing a MDB Family product. This crib will provide many years of service if you adhere to the following guidelines for assembly, maintenance, and operation. This crib is for residential use only. Any institutional use is strictly prohibited.
  • Page 2: Accessoires De Montage

    PARTS PIÈCES C. Front / Back Panel (2) A. Left Side Panel B. Right Side Panel C. Panneau avant / arrière (2) A. Panneau latéral gauche B. Panneau latéral droit D. Cross Bar (2) D. Traverse (2) E. Spring Frame J-1.
  • Page 3 H9. Bolt Cap (4) H10. 1-1/4" Allen Head Bolt (4) H8. Allen Wrench H9. Chapeau de H10. Boulon Allen de H11. Wrench (for bracket) H8. Clé Allen boulon (4) 3,2 cm (1-1/4 po) (4) H11. Clé (pour support) STEP 1. Set up side panels.
  • Page 4 E. Spring Frame STEP 3. Attach brackets to spring frame. E. Sommier Fixation des supports au sommier. ÉTAPE 3. Attach the left and right brackets (J-1,J-2) to spring frame (E) using Allen head bolts (H10), washers (H6), lock washers (H7) and bolt caps (H9). Tighten the bolt caps by using wrench for bracket (H11).
  • Page 5 STEP 5. Assemble the cross bar and front panel. ÉTAPE 5. Assemblage de la traverse et du panneau avant. Do not overtighten the bolts. Ne pas trop serrer les boulons. D. Cross Bar D. Traverse C. Front Panel C. Panneau avant KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE.
  • Page 6 CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27 1/4 INCHES (69CM) BY 51 5/8 INCHES (131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES (15CM). Please refer to the label (sample below) on the inside face WE WILL ASK YOU FOR YOUR SERIAL NUMBER FOR ALL of the headboard.
  • Page 7 DO NOT substitute parts. Contact This warranty does not cover any damaged MDB FAMILY for replacement parts and instructional literature if needed. or defective parts that result from installation •...
  • Page 8 AVERTISSEMENT : Le non respect des avertissements et directives d’assemblage peut entraîner de graves blessures ou la mort. LIRE TOUTES LES INSTRUCTIONS AVANT • Si le lit a besoin d’une refinition, utiliser un fini non-toxique conçu pour les produits pour enfants. D’ASSEMBLER LE LIT.
  • Page 9: Entretien Et Nettoyage

    REPLACEMENT OR MISSING PARTS VISITEZ-NOUS À : PLEASE VISIT US AT: WWW.THEMDBFAMILY.COM WWW.THEMDBFAMILY.COM OU CONTACTEZ-NOUS PAR COURRIEL : OR YOU CAN CONTACT US BY MAIL: MDB FAMILY MDB FAMILY 855 WASHINGTON BLVD. 855 WASHINGTON BLVD. MONTEBELLO, CA 90640 MONTEBELLO, CA 90640 revised03JUN2011...
  • Page 10 Crib ( 4781 ) - Toddler Bed Conversion Assembly Lit de bébé (4781) - Conversion en lit pour tout-petit * All of the parts and hardware you will need are supplied with the crib at the time of purchase. * Les pièces et accessoires de montage dont vous aurez besoin sont fournis avec le lit lors de l’achat.
  • Page 11 The mattress intended for use on the bed shall be a full-size mattress having minimum dimensions of 51 5/8" (1310 mm) in length, 27 1/4"(690 mm) in width and 4" (100 mm) in thickness and not exceeding 6" (152 mm). Le matelas à...
  • Page 12 Conversion Rails (4799 - Sold Separately) Assembly Instructions Traverses de conversion (4799 - vendues séparément) - Instructions d’assemblage B. Barrel nut (8) A. 3” Phillips head bolt (8) B. Écrou à portée cylindrique (8) A. Boulon à tête cruciforme de 7,6 cm (3 po) (8) STEP 1.