Guarantee; Liability Exclusion; Disposal Of Used Equipment; Ce Conformity Declaration - Multiplex POWER PEAK E7 Notice D'utilisation

[ Error ]
BID interruption!
* The BID system was con-
nected while a process was
active.
[ Error ]
BID error
* The BID system has been
connected or
disconnected.
19. G UARANTEE
Naturally all our products are guaranteed for 24 months as requi-
red by law. If you wish to make a justified claim under guarantee,
please contact your dealer in the first instance, as he is respon-
sible for the guarantee and for processing guarantee claims.
During the guarantee period we will rectify any functional defects,
production faults or material flaws at no cost to you. We will not
accept any further claims, e.g. for consequential damage.
Goods must be sent to us carriage-paid; we will pay return carri-
age costs. We will not accept any packages sent without pre-paid
postage.
We accept no liability for transport damage, nor for the loss of your
shipment. We recommend that you take out appropriate insurance.
Send your device to the approved Service Centre in your country.
The following requirements must be fulfilled before we can
process your guarantee claim:
• You must include proof of purchase (till receipt) with the retur-
ned product.
• You must have operated the product in accordance with the
operating instructions.
• You must have used recommended power sources and genui-
ne accessories exclusively.
• There must be no damage present caused by moisture, unau-
thorised intervention, reversed polarity, overloading or mecha-
nical stress.
• Please include a concise, accurate description of the fault to
help us locate the problem.
MULTIPLEX Modellsport GmbH & Co. KG
Westliche Gewerbestr. 1
75015 Bretten · Germany
Phone: +49 7252 - 5 80 93 33
www.multiplex-rc.de
Operating Instructions
Power Peak E7 EQ-BID
[ Error ]
BID incompatible
* Invalid data on the BID
chip or key.
(possibly LiPo cell count
greater than seven cells)
[ Error ]
Internal temperature
* The internal temperature is
excessive. Allow the charger to
cool down.
®

20. LIABILITY EXCLUSION

This battery charger is designed and approved solely for the pur-
pose of charging the batteries defined in the operating instruc-
tions. MULTIPLEX Modellsport accepts no liability whats over if the
charger has been used for any purpose other than the intended one.
MULTIPLEX Modellsport is unable to ensure that you observe the
assembly and operating instructions, or the conditions and meth-
ods employed for installing, operating and maintaining the radio
control system components. For this reason we accept no liability
for loss, damage or costs which are due to the erroneous use and
operation of our products, or are connected with such operation
in any way. Regardless of the legal argument employed, our obli-
gation to pay compensation is limited to the invoice value of those
MULTIPLEX products directly involved in the event in which the
damage occurred, unless otherwise prescribed by law. This does
not apply if the company is deemed to have unlimited liability ac-
cording to statu-tory regulation due to deliberate or gross negli-
gence.

21. DISPOSAL OF USED EQUIPMENT

Electronic equipment must not simply be discarded
in the normal domestic waste. That is the meaning
of the symbol shown here, which you will find on
the Power Peak® E7 EQ-BID. This symbol means
that you should dispose of electrical and electronic
equipment separately from the household waste at
the end of its useful life. Please take your unwanted
device to your local communal collection point of recycling centre.
This requirement applies to member countries of the European
Union as well as other European countries with a separate waste
collection system.
22. CONFORMITY DECLARATION
This device has been assessed and approved in accordance with
European harmonised directives. This means that you possess a
product whose design and construction fulfil the protective aims of
the European Community designed to ensure the safe operation
of equipment. If required, you can request MULTIPLEX Modell-
sport GmbH & Co. KG to supply a copy of the unit's Conformity
Declaration. Please contact the company using the contact details
at the foot of the page.
Errors and omissions excepted.
Technical modifications reserved.
Copyright Multiplex Modellsport 2015
Duplication and copying of the text, in whole or in part, is only permitted
with the prior written approval of Multiplex Modellsport GmbH & Co.KG.
29
15
# 30 8127