Connections; Notes On This Manual - Yamaha K-903 Mode D'emploi

LINE IN-LINE OUT
REC PLAY
4 3
L
R
REC OUT TAPE PB
L
R
Amplifier or receiver
In this manual, the main operation buttons of the front panel are indicated based on DECK B when the operation is common to
both DECKs A and B. Since the locations of the buttons of DECK A and DECK B are the same, you can easily find the desired
button even when operating DECK A.

CONNECTIONS

REAR PANEL CONNECTIONS
Make sure that power to both the deck and your amplifier/receiver is turned off
before making any connections.
÷ The White plug on the paired connecting cables corresponds to the Left
channel and the Red plug corresponds to the Right channel. Make sure that
the left and right channel connections are properly made, and that the plugs
are inserted firmly.
÷ The LINE OUT/PLAY jacks on the deck should be connected to the TAPE PB
(Playback/Input) jacks on your amplifier/receiver, and the LINE IN/REC jacks
on the deck should be connected to the REC OUT (Recording/Output) jacks
on your amplifier/receiver.
÷ The LINE OUT terminals on this unit are numbered 3 and the LINE IN jacks
are numbered 4. When connecting this unit to a YAMAHA amplifier or
receiver whose terminals are numbered 1, 2, 3, 4 ... (etc.), connect this
unit's LINE OUT terminals to the input terminals numbered 3 and connect this
unit's LINE IN terminals to the output terminals numbered 4 on the rear panel
of the amplifier or receiver.
÷ Connect the power cord to an AC wall outlet or to an AC outlet on the rear
panel of your amplifier/receiver (if provided).

NOTES ON THIS MANUAL

Main operation buttons of DECK A
NATURAL SOUND CASSETTE DECK K-903
RESET DIRECTION
%
CLOSE
!
Cassette Stabilizer
DECK A
PLAYBACK
SEARCH
STANDBY/ON
MODE DOLBY NR EJECT
O / p / ∏ / RELAY OFF/ B/ C
(U.S.A. model)
To an AC outlet
Main operation buttons of DECK B
DIRECTION RESET
%
CLOSE
⁄ ! ⁄
PLAY PLAY
RECORD/PLAYBACK
& &
MUTE/SEARCH REC/PAUSE
DUBBING A # B
EJECT
NORMAL HIGH
Cassette Stabilizer
DECK B
REC LEVEL PHONES
MIN MAX
5