SETTING END OF COOKING TIME / DELAYED START
IMPORTANT: the start delayed setting is not available for the following functions: FAST PREHEATING, BREAD/PIZZA,
GENTLE CONVECTION BAKE.
N.B.: with this setting, the selected temperature is reached in a more gradual way, so cooking times will be slightly
longer than stated in the cooking table.
The end of cooking time can be set, delaying the start of cooking by up to a maximum of 23 hours and 59 minutes. This can only
be done once cooking time has been set.
After setting cooking time, the display shows the end of cooking time (for example 15:45) and the symbol
To delay the end of cooking time, and thus also the cooking start time, proceed as follows:
1.
Turn the "Browse" knob to display the time you wish cooking to end (for example 16:00).
2.
Confirm the selected value by pressing button
has been made correctly.
3.
The oven will automatically delay the start of cooking so as to finish cooking at the set time.
At any time, however, set values (temperature, grill setting, cooking time) can be changed using button
followed by the "Browse" knob to change values and button
INDICATION OF THE RESIDUAL HEAT INSIDE THE OVEN
If at the end of cooking, or when the oven is switched off, the temperature inside the oven is over 50°C, the display shows the
word HOT and the current temperature. When the residual heat reaches 50°C, the display shows the current time again.
TIMER
This function can be used only with the oven switched off and is useful, for example, for monitoring the cooking time of pasta.
The maximum time which can be set is 23 hours and 59 minutes.
1.
With the "Functions" knob at zero, turn the "Browse" knob to display the desired time.
2.
Press button
to start the countdown. When the set time has elapsed, the display will show "00:00:00" and an acoustic
signal will sound. To mute the acoustic signal, press button
SELECTING SPECIAL FUNCTIONS
Turn the "Functions" knob indicator to the symbol
To browse, select and start one of these functions, proceed as follows:
1.
Turn the "Functions" knob to symbol
2.
Turn the "Browse" knob to scroll the list of functions; the function names are in English: DEFROST, KEEP WARM, RISING.
3.
Press button
to confirm.
BROWNING
At the end of cooking, with certain functions, the display indicates the possibility of browning. This function can only be used
when cooking time has been set.
At the end of cooking time, the display shows: "PRESS
cycle. This function can be selected consecutively a maximum of twice.
: the two dots of end of cooking time flash, indicating that the setting
to confirm.
(the time of day appears on the display).
to access a submenu containing three special functions.
: the display shows " DEFROST" along with this function's corresponding symbol.
TO BROWN" . Press button
GB25
flashes.
, and the oven starts a 5 minute browning
to go back,