Table des Matières
Publicité
Troubleshooting
Since the built-in sensors detect body heat, they may not work prop-
erly if exposed to extremely low or high temperatures. At low tem-
peratures, body heat may be insulated by thick winter clothing. In
very warm temperatures, the sensor may not be able to distinguish
between body heat and ambient temperature. The sensor will work
properly again when the temperature returns to normal.
Problem
Cause
Lamp does not
1. ON/OFF switch set
come on.
to OFF.
2. Low batteries.
3. Solar module is not
properly plugged in
to lamp.
Light keeps going
Light sensor is reacting
on and off.
to extraneous light.
Light remains on
A heat source or
all night.
heat-refl ecting object is
located within range of
the sensor.
Motion detector
1. A heat source or
activated at
heat-reflecting
random or for no
object is temporarily
apparent reason
located within range
of the sensor.
2. Minor problem with
the sensor.
Motion detector
1. Batteries are dead.
does not react
2. ON/OFF switch set
at all.
to OFF
The range will
Different weather
vary from one day
conditions
to another.
Solution
1. Set ON/OFF switch to
ON.
2. Charge batteries as
detailed above.
3. Push the plug firmly
in.
Remove batteries and
reduce light sensor
settings.
Remove the heat
source/object from the
sensor range, or relocate
the lamp.
1. Adjust the sensor
range so that it no
longer detects the
heat source.
2. Remove the batteries
to reset the sensor.
1. Charging the batteries
2. Set the switch to ON.
Reset the range
USER MANUAL LEDS220 011
Disposal
Do not dispose of batteries or electric and electronic devices in
the normal household waste. The consumer is legally obliged to
return electrical and electronic devices and batteries that are at
the end of their useful life to the point of sale or public collection
points that have been set up for this purpose. Legislation in the coun-
try of use governs individual details regarding disposal. The symbol on
the product, the user guide or the packaging indicates this legal re-
quirement.
Declaration of conformity
The CE marking is Schwaiger GmbH's declaration that the
product meets the essential protection requirements stipulat-
ed in the applicable directives.
Warranty
The warranty period starts when the product is purchased. The
purchase receipt, such as a till receipt, invoice or delivery slip, serves
as proof of this date. Keep these documents in a safe place. Our
warranty is based on our warranty conditions valid at the time of
purchase.
Disclaimer
Schwaiger GmbH does not accept any liability or guarantee for
damages that are sustained due to improper installation or mounting,
improper use of the product or non-compliance with the safety
instructions.
Manufacturer's information
Dear Customer,
Please contact our Technical Support if you need technical advice and
your retailer is unable to help you. Technical Support is available in
German.
11
Publicité
Table des Matières
