Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5. BEFORE INSTALLATION
Before installing your new Cinderella toilet, please make sure you read each section of this installation manual
carefully. These instructions provide you with the necessary guidance for the proper installation, use and
handling your toilet. Keep these instructions in a safe place so you can refer to them whenever required.
NB!
•
We strongly recommend that you do not install the toilet where there is other air dependent equipment that
could adversely affect the system, such as extraction fans, ventilators or open fire sources. If other air-
dependent equipment is located in the same area as the toilet, ensure that it is not operated at the same
time as the incineration toilet.
•
Before cutting any holes, always check that you will not cut any electrical wiring or water pipes.
NOTE!
•
The toilet must be placed on a firm and level base.
•
Your Cinderella GAS incineration toilet can be installed on a heated floor.
5.1 SELECT THE LOCATION
When planning to place the toilet, it is often useful to consider the free
space around the toilet. Make sure you have enough space to both operate
the toilet and sit properly.
Ensure that the gas and electrical specifications are designed for the area
where you want to install the toilet. Please see the gas and electrical
specifications on page 11-12.
Ensure that the desired position of the toilet will not conflict with any other
existing installations such as water pipes, ventilation pipes, electrical
installations etc.
5.2 PLANNING YOUR VENTILATION
Planning and setting up the ventilation is an important part of the installation of your Cinderella toilet. Proper
installation will ensure optimal airflow and will not restrict the pipe flow.
Outlet Air Pipe:
You must install the outlet pipe vertically above the roof without any additional bends. Incorrect
installation may cause poor incineration, odours and product wear.
For detailed instructions on how to install the outlet pipe, please thoroughly read the section on how to install
the outlet air pipe on pages 8–9.
Inlet Air vent:
The Cinderella GAS toilet is designed to make use of the air supplied into the room. This air is critical for
ensuring oxygen for incineration and proper functioning of the system. For detailed instructions on how to
install the air inlet vent, please thoroughly read the Inlet air section on page 10.
7
Publicité
Chapitres
Table des Matières
