Function Description; Operation Procedure; Basic Functions - BERG E-Frame BFR Mode D'emploi

4.3.2 Function description

• Speed display
Shows current speed
• Consumption indicator
Six horizontal blocks show the energy level of the battery (each block represents 17% of electric
energy), flickering to remind you to charge the battery.
• Trip distance (resets when the power is off )
Shows trip distance.
• Odograph (ODO)
Shows total distance.
• Average speed (AVG)
Shows average speed.
• Power assist
Show power assist. 4 levels of power assist which adjustable.
• Display backlight
Switch between 2 levels brightness, default is backlight off.

4.3.3 Operation procedure

Button definition
More/higher
Less/lower
Menu
On/off and backlight
Press this button to have power, press this button for 2 seconds to turn off the power.
The system automatically shuts off without any operations for 5 minutes.
/ There are 4 levels of power assist (Eco, Tour, Speed and Turbo). Press these buttons to adjust the
power assist from low to high.
There are 4 mode pages (odometer, trip distance, average speed, one way time). Press this button to
adjust the mode.

Basic functions

• Use the button to switch on the backlight when the power is on
• In the menu at trip distance (TRIP), press the
• In the menu at average speed (AVG), shows average speed (average speed=trip distance /
movement time)
• In the menu at movement time (TIME), shows the time of a single trip.
Failure codes
Error Type of error
ERR-01 Sensor failure
ERR-02 Motor hall fault or motor short circuit
ERR-03 Controller failure
ERR-05 Low energy alarm
ERR-06 Cyclist's feet on the pedal when starting
E-Frame BFR
button for 2s to reset the counter and time.
How to solve
Contact your local dealer
Restart using the
Contact your local dealer
Charge the battery
Restart without your feed on the pedal
button
17