Despite the care we take during production, a breakdown can never be totally ruled out. Before contacting
your retailer's after-sales department, please check that:
▪
The appliance is properly plugged in
▪
There is not a power cut in progress
▪
The breakdown is not one of those described in the table at the end of this manual
IMPORTANT: if the power cable supplied is damaged, it must be replaced by the manufacturer, a service
center approved by the brand or the retailer. In all events, it must be replaced by qualified personnel in
order to avoid any risk of injury.
If these checks reveal nothing, then contact your retailer's After-Sales Department.
Unplug the appliance before carrying out any maintenance or repair work.
6. TROUBLESHOOTING
You can solve many common cooler problems easily, saving you the cost of a possible service call. Try the
suggestions below to see if you can solve the problem before calling the servicer.
PROBLEM
Cooler does not operate
Cooler is not cold enough
The light does not work
CAUTION!
▪ Not plugged in
▪ The appliance is turned off
▪ The circuit breaker tripped or a blown fuse
▪ Check the temperature control setting
▪ The ambient temperature requires a temperature readjustment
▪ External environment may require a higher setting
▪ If the ambient temperature is > 25 ° C, your appliance can only cool
down by 10°C below the ambient temperature.
▪ The door is opened too often
▪ The door is not closed completely
▪ The door gasket does not seal properly
▪ Not plugged in
▪ The circuit breaker tripped or a blown fuse
▪ The bulb has burned out
▪ The light switch is "OFF": press the "light" button to activate the
function
20
POSSIBLE CAUSE