Papago GoSafe 535 Guide D'utilisation page 10

4. Settings
Press the
● Record Mode
a. Automatic Recording
b. Monitor Mode: recording will be started when function activated, in this
mode your device will take snapshots every second while video
recording.
c. Motion Detection: recording will be started when function activated. If
there is no movement for more than 60 seconds, recording will be
stopped and switched to detection mode. Recording restarts when
dash cam detects movement. The action is repetitive.
This function only works when the device has a continual power
source after the vehicle´s engine is turned off.
● Driving Safety
a. Calibrate: Adjust the devices' angle to overlap with the horizon line. This
will help in adjusting the camera to an optimal position.
b. Stop Sign Recognition:The device will recognize any Stop Sign
Recognition and warn you when you are driving over that limit with a
beep.
c. Stop & Go: When activated, after the car is stopped for 10 seconds the
device will start to detect when the car in front has proceeded to go.
When the car in front is driving away, it will give an audio alert to remind
you to begin driving.
d. Driver Fatigue Alarm: When activated, the user can setup a defined
alarm clock, periodically reminding you to take a rest before continuing
to drive. Available options are : 30 minutes/1 hour/2 hours/4 hours/off.
e. Light Reminder : When activated, if driving in a dark environment (such
as tunnel or parking structure), it will have an audio alert and display
the light alert icon on the screen. The alert can be turned on/off.
● Volume: set system volume, off, 20%, 40%, 60%, 80% or100% are
available for selection.
● Microphone
Enable or disable voice recording.
button to enter "Settings".
English 9