Setup; Microsd Card; Connecting The Camera To The Power Supply - Sygonix 1911204 Notice D'emploi

10. Setup

a) MicroSD card
• The product supports MicroSD cards from 2 to 128GB to
store screenshots and videos. We recommend using Class
10 (high-speed) MicroSD cards.
Before inserting the card, format it with the FAT32 file
system. Refer to your computer software instructions
for details.
• If the card is not recognized, check that the card meets the
necessary requirements. If necessary, reformat the card or try
using another compatible card.
• You can use the device to view live video without a card in-
serted, but cannot save photos or record video.
• If the MicroSD card gets full during recording, old files will be
automatically overwritten.
• Insert a MicroSD card into the card slot (3) in the correct ori-
entation. The card should click into place. Exercise caution
and do not use force when inserting the card.
• To remove the card, press it with the tip of your finger until it
clicks out of place and ejects.
b) Connecting the camera to the power supply
• Insert the USB cable into the micro USB connection (10) on
the back of the product.
39