Miele SGDE0 Instructions D'utilisation page 18

en
SoftCarpet
Depending on the model, your vacuum
cleaner will be fitted with one of the fol-
lowing suction power selectors:
– Footswitches
– Footswitches with Auto function
– Footswitches with SoftCarpet func-
tion
Footswitches (Fig. 23)
The first time the vacuum cleaner is
switched on, the highest power setting
will be selected automatically.
After that, the vacuum cleaner will
switch on at the power setting that was
last used.
 Press the + footswitch to select a
higher suction power.
 Press the - footswitch to select a
lower suction power.
Footswitches with Auto
(Figs. 24 + 25) function
The first time the vacuum cleaner is
switched on, it is in the Auto power set-
ting.
 Press the + footswitch to select a
higher suction power.
 Press the - footswitch to select a
lower suction power.
After that, the vacuum cleaner will
switch on at the power setting that was
last used.
18
Particularly soft floor-
ing
Footswitches with SoftCarpet
(Fig. 26 + 27) function
The first time the vacuum cleaner is
switched on, it is in the SoftCarpet
power setting.
 Press the - footswitch to select an-
other power setting.
Activating the SoftCarpet power set-
ting:
 Press the + footswitch until the maxi-
mum power setting has been
reached.
 Then press the + footswitch again.
After that, the vacuum cleaner will
switch on at the power setting that was
last used.
Opening the air inlet valve
(Figs. 28 + 29)
(depending on model)
It is easy to reduce the suction power
for a short time, e.g., to prevent rugs or
other objects being sucked into the
vacuum cleaner.
 Open the air inlet valve on the handle
far enough to reduce the suction
power.
This reduces the suction on the respec-
tive nozzle used.
During vacuuming
 When vacuuming, pull the vacuum
cleaner behind you on its wheels. You
can stand it upright for vacuuming
stairs and curtains, etc.