Using Auto Setup (Intellibeam) - Yamaha YSP-500 Mode D'emploi

Center line
Assembling the supplied cardboard
microphone stand
You will find three separate parts (one circular part and
two longitudinal parts) of the cardboard microphone stand
originally put together.
1
3
1
Disassemble the three parts of the cardboard
microphone stand originally put together.
2
Insert one of the longitudinal part into the
crevice of the other longitudinal part.
3
Place the circular part on top of the two
combined longitudinal parts.
4
Place the supplied IntelliBeam microphone
on top of the circular part.
IntelliBeam
microphone
2
4

Using AUTO SETUP (IntelliBeam)

Once the IntelliBeam microphone is firmly connected to
this unit and properly placed in your listening room,
follow the procedure below to start the AUTO SETUP
procedure.
You can also enter the AUTO SETUP procedure simply by
pressing and holding AUTO SETUP for more than two
seconds. In this case, this unit performs both of the beam
optimization and sound optimization procedures.
INPUT VOLUME STANDBY/ON
STANDBY/ON
STB VCR
INPUT1
TV
AUTO
VOL MODE SETUP
5BEAM ST+3BEAM
1
STEREO
4
7
0
CH LEVEL
TEST
VOLUME
AUTO SETUP (IntelliBeam)
POWER POWER
AV TV
DVD AUX
TV
INPUT2 MACRO
INPUTMODE SLEEP
3BEAM
2 3
MY BEAM MY SUR.
5 6
8 9
SUR. DECODE
+10
MENU
TV/AV
ENTER
YSP
RETURN
CH TV VOL
33
En