Operating Instructions; Other Features - mundoclima MH-V9 Série Manuel D'installation Et L'utilisauter

Operating Instructions

Control Panel Features
Indicator Function
Tank full indicator light;
Auto defrost indicator light
Note about Auto defrost indicator light:
· When auto defrost is turned on, the humidity level indicator lights up;
· The indicator light flashes at 5Hz when there is room temperature sensor error or evaporator
temperature sensor error;
· If the auto defrost indicator light flashes, unplug the unit and plug it back in. If the error repeats, call for service.
Power / button
Press to turn the dehumidifier on and off.
Note: The power light illuminates when the unit is
switched on and turns dark when the unit is switched off.
When a Humidity/Temperature sensor malfunction
occurs, the power light blinks 5 times per second (on
some models).

Other features

Auto Defrost
When frost builds up on the evaporator coils, the
compressor will turn off and the fan will continue to
run until frost disappears.
Tank Full Indicator Light
Glows when the tank is ready to be emptied, or
when the tank is removed and not placed in its
proper position.
Indicator Function
Continuous operation on indicator light
40% humidity level set mode operation on
indicator light
50% humidity level set mode operation on
indicator light
60% humidity level set mode operation on
indicator light
/ / / / / / / / / / / /
Mode/ button
Press to select the operation mode:
continuously dehumidification
50% humidity level
continuously dehumidification
Auto Shut Down
The dehumidifier shuts down when the tank is full, or
when the tank is removed and not placed in its proper
position.
In some models, the fan motor will continue to run for
30 seconds.
30
40% humidity level
60% humidity level