Initial Setting - Mitsubishi Electric City Multi Série Manuel D'installation

4. Electrical work
7
A
Fig. 4-10
B
3
5
6
Fig. 4-12
1
2
4
3
6
5
8
C
B
Fig. 4-11
A
1
2
4

4.12. Initial setting

The following settings can be made in the initial setting mode.
Item
Temperature unit
Time display
AUTO mode
Pair No.
Backlight
4.12.1. Switching to the initial setting mode
button 1 to stop the air conditioner.
1. Press the
button 2.
2. Press the
The Function setting screen will be displayed and the function No. A
3. Check that function No. "1" is displayed, and then press the
The Screen display setting screen will be displayed. (Fig. 4-11)
button 4 to change the function No.
Press the
4.12.2. Changing the temperature unit (Fig. 4-11 A)
button 5.
Press the
button 5 is pressed, the setting switches between
Each time the
: The temperature is displayed in degrees Celsius.
: The temperature is displayed in degrees Fahrenheit.
4.12.3. Changing the time display (Fig. 4-11 B)
button 6.
Press the
button 6 is pressed, the setting switches between
Each time the
.
: The time is displayed in the 12-hour format.
: The time is displayed in the 24-hour format.
4.12.4. Changing the AUTO mode (Fig. 4-11 C)
A
button 7.
Press the
button 7 is pressed, the setting switches between
Each time the
D
: The AUTO mode operates as the usual automatic mode.
: The AUTO mode operates using dual set points.
4.12.5. Changing the pair No. (Fig. 4-11 D)
button 4.
Press the
E
button 4
Each time the
Pair No. of
wireless remote
SW22-3
controller
ON
1 OFF
2 ON
3 OFF
4.12.6. Changing the backlight setting E
button 8.
Press the
button 8 is pressed, the setting switches between
Each time the
.
: The backlight comes on when a button is pressed.
: The backlight does not come on when a button is pressed.
4.12.7. Completing the setting
button 3.
Press the
A
button 2.
Press the
(The air conditioner operation is stopped.)
4.12.8. How to disable Auto mode operation (Fig. 4-12)
button 1 to stop the air conditioner.
1. Press the
B disappears.)
(
button 2 for 5 seconds.
2. Press the
blinks.)
button 5.
3. Press the
4. Completing the settings (Fig. 4-12)
button 2 for 5 seconds.
Press the
Setting Fig. 4-11
A
B
C
D
E
button 3.
Indoor PC board SW22
SW22-4
ON Initial setting
ON
OFF
OFF
button 6 to disable the timer.
and .
and
and .
and
A