MAINTENANCE
Use only a good grade hydraulic oil (e.g. Mobil
TDE 13M or equivalent).
TROUBLE SHOOTING
Symptom
Jack will not lift
load
Jack bleeds off
after lift
Jack will not lower
after unloading
Poor lift
performance
Will not lift to full
extension
Any questions
For any questions please contact the MICHELIN Consumer Enquiries Helpline :
Tel : +33 (0)4 76 32 69 37
Email : michelin@impex.fr
Possible Causes
• Release valve not tightly
closed
• Overload condition
• Release valve not tightly
closed
• Overload condition
• Hydraulic unit malfunction
• Linkages binding
• Fluid level low
• Air trapped in system
• Fluid level low
EN
STORAGE
When not in use, store the jack with saddle fully
lowered.
Corrective Action
• Ensure release valve is tightly closed
• Remedy overload condition
• Ensure release valve is tightly closed
• Remedy overload condition
• Contact Customer Support
• Clean and lubricate moving parts
• Ensure proper fluid level to be
checked by specialist
• ensure proper fluid level
9