Personal Safety - Greencut GLM560L-16 Manuel D'utilisation

All information included in this manual is relevant to your own safety and that of your environment. If you have any
questions about the information included in this manual, consult a professional or contact the Authorised Service Centre.
The following information on hazards and precautions includes the most probable situations that may arise during the
use of this machine. Consult all the documentation, packaging and product labels before using it.
If you encounter a situation not described in this manual use common sense to use the machine as safely as possible
and, if you see danger, do not use the machine.
USERS
• This machine has been designed to be manipulated only by users of legal age who have read and understood these
instructions. Do not allow people who may not understand these instructions or under age to use this machine.
• Familiarize yourself with this machine before using it. Make sure you know the controls and safety devices and
how they should be used.
• If you are an inexperienced user, we recommend that you do some practice doing simple jobs and, if possible, in
the company of an experienced person.

PERSONAL SAFETY

• Be alert and use common sense when operating this machine. Never use the machine with defective protections
or without safety devices.
• Do not modify the controls of this machine.
• Do not use this machine if any of its components is damaged.
• Do not use this machine when you are tired or under the influence of drugs, alcohol or medication.
• Remove all keys or hand tools from the work area before starting this machine. A key or tool that is nearby can
be touched by a moving part of the machine and be projected causing personal injury.
• Avoid accidental starting of the equipment; make sure that the equipment and the switches of the power supply
are in the OFF position before connecting or moving the product.
• Always be sure to maintain a good balance and be in a safe position. Always keep your feet firmly on the ground
and operate the machine only when it is on a fixed, secure and levelled surface. Sliding or unstable surfaces can
cause a loss of balance or control of the machine.
• It is not recommended to use this machine on slopes with more than 5% gradient. Cutting into mounds can
be dangerous. Be careful when walking on slopes or wet grass. Be especially careful when changing directions
on a slope. Cut parallel to the surface of the slope, never up and down. If you are an inexperienced user, we
recommend that you have a minimum practice on a flat surface.
• Do not put your hands or feet under the mower. Keep all body parts away from the blade when the machine is in
operation. Before starting the mower, make sure that the blade is not in contact with any object.
• The cutting device of this machine is sharp. Keep all body parts away from cutting elements and moving parts
when the machine is running. Before starting the machine, make sure that the cutting element is not in contact
with any object. (REPETICIÓ/PARAFRASE)
• Hold the mower with both hands on the handlebar and always stand behind it.
• Do not leave this machine running without supervision.
• Do not attempt to remove cut material from the cutting tool when it is moving. Make sure that the machine is
switched off when you carry out cleaning work on scraps of material.
• Never hold the machine by the cutting tool. The cutting tool has sharp edges that may cause injury.
WORKWEAR
• Dress appropriately. Do not wear loose clothing or jewellery. Keep your hair and clothes away from moving parts. Use:
-
Eye protection (safety glasses / mesh / methacrylate screens).
-
Hearing protection (earmuffs / earplugs).
49
EN