Temperature Selection - Reliable VELOCITY 200IR Guide D'utilisation

3. If you wish, select ironing with steam (see "STEAM SELECTION").
4. Take the 200IR by the handle and move the soleplate over the garment to
be pressed.
5. To switch off the 200IR, turn the temperature selector (3) to the OFF
position again.

TEMPERATURE SELECTION

The 200IR has 4 temperature positions for you to choose between, by turning the
selector (3).
Turn the temperature selector (3) as many times as required until the desired
temperature level is reached (fig. 2)
After turning the temperature selector (3) from the OFF position to any other
temperature position, the three luminous indicators will light up for a few seconds
and a beep will sound.
The temperature indicator will flicker until the temperature selected has been
reached. Once the working temperature has been reached, the indicator will light
up continuously (fig. 2).
STEAM SELECTION
The 200IR has two steam positions; medium steam and maximum steam. To select
the desired steam level:
1. Press the button (5) to select medium steam (fig. 3) or the button (6) for maxi-
mum steam (fig. 4).
If the steam function is selected without having reached the temperature
selected, the luminous indicator on the steam button selected (medium
or maximum
Once the temperature is reached, the luminous indicator of the temperature
selected •, ••, ••• or MAX and the LIGHT indicator of the steam button selected
(medium
2. To stop the emission of steam, press the steam button again. A beep will
sound, the corresponding luminous indicator will switch off (medium
maximum
CONTACT SENSOR
The 200IR has a contact sensor which stops the release of steam immediately
after detecting lack of contact on the handle. This ensures lower power consump-
tion as well as lower water consumption. The steam function switches back on
automatically when hand contact with the handle is made. If no steam selection
has been made, the sensor will not release any steam.
AUTO SHUT OFF: AUTO-PAUSE
The 200IR has an automatic switch off system.
09
) will flicker until the working temperature is reached (fig. 5).
or maximum ) will no longer flicker simultaneously.
) and steam will no longer be emitted automatically (fig. 6).
or