Hansgrohe AXOR Starck 104101 Série Instructions De Montage / Mode D'emploi / Garantie page 6

1
2
1
2
3
6
English
Installation – ½"
Requires ½" NPT male nipple recessed ⅜" behind
surface of finished wall.
(1) Wrap the threads on the nipple with Teflon tape.
(2) Install the mounting piece. Tighten using a ⁷⁄₁₆"
Allen wrench (not included).
4
(4) Install the spout.
Tighten the screw using a 3 mm Allen wrench.
(3) Seal the wall around the mount-
ing piece using waterproof sealant.
Failure to seal the wall may result in
water damage.